How to remove blank page from Word. Remove Blank Pages - Word

20.10.2019

Instruction

To determine the reasons for the appearance of a blank sheet, you need to look at all non-printable characters. This can be done by clicking on the special button on the Standard toolbar, which is located next to the Document Outline button and the Drawing Panel. If this panel is not displayed in your editor window, click the top menu "View", select the command "Toolbars" and check the box "Standard".

After clicking on the button for displaying non-printable characters, other characters will appear in your document. In this view mode, you can find extra spaces and pressing the Enter button. You need to edit the entire document in this way, as a result, you will see a decrease in the entire text by several lines. If the text is large, it can be reduced even by a paragraph.

Carefully review each page, as soon as you see the inscription "Page Break" with a large number of dots, feel free to delete this element. Most likely, this element was the reason for the transfer of empty characters to a new page.

If for some reason you cannot remove some characters or the Page Break, you should do the following: try all the possibilities for removing this value. You can remove some unnecessary characters not only by pressing the Delete key, but also by using the Ctrl + X (cut) key combination, as well as the Backspace key and the Ctrl + Backspace combination (delete a word).

In some cases, all of the above methods for removing non-printable characters do not help. Try editing the document in Web Document mode. To do this, click the top menu "View" and select "Web Document". After you finish editing the document, don't forget to change the view mode to Page Layout.

Sources:

how to delete a sheet in word
How to delete an unwanted sheet in Word 2013: effective ways

Managing the content of sites created with ucoz.com is intuitive, but a novice user may encounter some problems. So, the question may arise about how to remove the extra page from your site. There are several ways to do this, but in any case, you must have administrator rights for this.

Instruction

Log in to the site and in the "Designer" menu, select "Enable Constructor", the page will change its appearance, block borders and additional buttons will appear. In the Main site menu category, click on the button in the form of a wrench - an additional window "Menu Management" will open.

Opposite each menu item and submenu you will see two buttons. The button in the form of a pencil is needed to edit the names and addresses of menu items. To delete page, click the [x] button. Save your changes using the Save button in the Menu Control window, or choose Save Changes from the Design menu. After that, you can turn off the design mode by selecting the corresponding item in the same menu.

Remove excess page You can also use the control panel. Open the panel by selecting "Login to Control Panel" from the "General" menu. Enter your password and security code. In the menu located on the left side of the page, select the "Page Editor" section. The module management page will open, select the "Manage site pages" item on it.

At the top of the page, use the drop-down list in the custom fields to "Page Editor" and "All Content" to see a list of all available pages in the window. On the right side opposite each item and sub-item of the menu there will be control buttons. The first two buttons are responsible for editing materials. To delete what you no longer need page, click on the last button in the form of the [x] icon and confirm the deletion in the prompt window that appears by clicking on the OK button.

If you are not sure if you want to delete page, you can temporarily disable its display. To do this, click on the button in the form of a wrench and on the material editing page, set the marker opposite the “Page content temporarily for viewing” item in the “Options” group and save the changes.

Hi again! Today we will talk about such a seemingly simple topic as deleting pages in a Word document. Of course, this operation is unlikely to cause any particular difficulties. The only thing you need to consider is which page you want to delete - with or without text, and where it is located - at the beginning, end or middle of the document. In Word, and here there are ways of working that you probably do not know about. These tricky moments moments today and consider.

As usual, we will cover the topic with a few simple examples in different versions of the program. And at the end of the article posted a short video. So, let's study the material.

Delete a page in word 2010 in the middle of a document (with text)

If you have an unnecessary page with text that needs to be deleted, you can do this as follows. The first thing to do is to place the cursor anywhere on the page to be deleted. After that, in the upper right corner of the document on the main panel, we find the “find” button. A binoculars icon is shown next to it. Click on it and in the drop-down menu, click on the inscription "Go".

A window will open in front of us in which the search object is selected. In our case, this is the page and it is the first one by default, and is already selected.

Nearby there is only one field "Enter page number". Here we type “\page”, after which we press the “go” button. As a result, all text on the page will be highlighted. It remains only to press the "DELETE" key and the page with this text will disappear.

In fact, this procedure is the removal of only unnecessary text, and not the page itself. After all, the text that comes after the deleted text rises higher, replacing what was before. Therefore, there is a much easier way to delete pages like this. Just select by holding the left. The mouse button all the text on the page and also press the "DELETE" button.

Delete the last blank page at the end of the document (with headers and footers)

If your document contains headers and footers, and an empty last page has formed at the input of the work, then deleting it is very simple. We put the cursor on the previous page and press the "DELETE" key, by pressing it repeatedly we remove the empty page. It is possible to include non-printing characters before the start of the operation, so that it would be easier to navigate the deleted pages.

How to remove extra blank page in word 2010 at the beginning of a document

The appearance of an extra blank page is most often associated with the use of breaks. We do not see all this in the usual format. To display them, use a special button on the main panel. However, many people like to type with the display of non-printing characters turned on. So, turn on the visibility of these non-printable characters: ¶.

Then select them on the page to be deleted and press the Delete or BackSpace key. As a result, the page will be deleted.

Removing a blank page in word 2013 in the middle of a document

When deleting an unnecessary page in a Word document version 2013, you must enable the display of non-printing characters. After that, we put the cursor in the place where the last non-printing character is displayed before the page to be deleted. By pressing the Delete key several times, we delete an unnecessary page.

You can also delete a page using the page break options. You can open them from the "Paragraph" tab on the main menu bar.

In the first tab "Indents and Spacing" large values can be set to Before or After the interval. In the second tab "Position on the page" you need to check the value of the "pagination" section. After checking the correctness of the settings and removing the excess, you can safely remove the unnecessary.

Removing a blank page in word 2007 at the end of a document

To remove a blank page at the end of the document, we will use a fairly simple action. We set the cursor at the end of the previous page and by repeatedly pressing the "delete" key, we delete invisible lines. For convenience, we include these non-printable characters. Then you can select them all on the page to be deleted, and then simply press the Delete key. And at the end of the topic, a short video on deleting pages in the Word.

Here, in principle, all the simple steps to remove unnecessary pages. Although everything is simple, but you need to know some tricks. That's all for now.

Perhaps every user is familiar with the Word text editor. It is used to read, create and edit documents, while sometimes the simplest knowledge for full-fledged work with the program may not be enough. Today we’ll talk about how to delete a page in Word. Let's see if it is possible to remove an unnecessary sheet without harming the entire text.

Removing a blank page

When it was necessary to eliminate an extra blank sheet that does not contain any valuable information, you must use the following algorithm:

make a left mouse click anywhere on the extra page, so the cursor is set (a dash located vertically);
in the "Home" section (at the top), look for the display of all signs and click on it (the combination Shift + Ctrl + 8 helps);

tabs and spaces will appear on the monitor, which were not visible before. It is necessary to eliminate them from a blank page to automatically delete it. For this, the BackSpace button is used (if there is no such word on the keyboard, there will be a left arrow key, usually located above Enter ).

How to delete a page in Word located at the end of a document

Sometimes an empty sheet is found at the very end of the file, although there are two or three or more. Such an object affects the size of the final file, makes it larger, and is also sent to print. For the thesis, term paper, such a page is not needed at all.

Here you can use the first method: set the cursor to the bottom and click the BackSpace button so that it is at the end of the penultimate page.

In the event that the extra page is located at the very beginning (it is the first), then we act in the same way - we remove unnecessary characters, after which all the text will move up.

How to delete an unnecessary document

Such knowledge may be needed if you opened a new document, wrote the text, corrected it, copied it to another file, and this one became redundant.

You can delete it by simply clicking on the close - the cross in the upper right corner. A notification will pop up immediately asking if you want to save the changes, click "No".

When you plan to continue working with this file, and what you have written needs to be deleted, you should select everything using the keys Ctrl + A, and then press Del on the keyboard.

Removing the title page with header and footer completely

In the releases of the Word, from version 2013, it is easy to do this - change the old "title" to the new one. But in older editions of the program, you should first delete one page, and only then add a new one in its place:

find the "Insert" section (located near the "Home");
in the "Pages" subsection there is a necessary button, if you click on it, a special menu will open;
under the templates there will be a link to eliminate the extra sheet.

Getting rid of the page with text

If you often work with this editor, you probably had a situation where you needed to delete an area with pictures, text content, and other content. In such cases, two methods can be used.

Second sheet

For example, you have some kind of file, you need to erase the second page there (several after it). You will need:

place the cursor at the very beginning of the first line;
scroll to the end of the document page;
click on the keyboard layout Shift and hold it, making a left mouse click at the very end of the final line on an unnecessary sheet. This is how you select all the content (the background will change color).

This option is suitable for all versions of Word 2010, 2003, and 1997.

It remains only to click Del or BackSpace to delete unnecessary data.

Some sheet in a big file

When working with a large text document with hundreds of pages, scrolling takes long time. So the above method should not be used. There is a better option. For this, the built-in Word search is useful. The combination Ctrl + H will help to open the window. You will immediately be taken to the "Replace" section, but we are interested in another one - "Go", then enter the desired number in the "Find" subsection.

Do not close an open window. After moving to a specific sheet, in the line "Enter number ..." write the command:

Click "Go" again to select the text.

After that, you can close the dialog by clicking on the cross on the right side. We remove the entire selected part in the middle of the document with the BackSpace or Del buttons.

How to delete a page in a Word document? It's actually easy to do this. For beginners, this article will be especially useful. You can watch the instructional video, so it will be even clearer.

Sometimes when working with the Microsoft Word text editor, such a problem may arise - an empty sheet has formed. Everything would be fine, only by chance it can be created in the middle of the document, and this will disrupt the duplex printing process or knock down the page numbering.

In general, you always need to get rid of empty sheets, otherwise you can get a marriage at the end of the work. To avoid possible problems, I recommend that you always use the Print Preview function before printing. You can launch it by clicking on the " office» — « Seal» — « Preview».

Now back to our blank sheets. So, our task is to remove the blank sheet from the document. Pages for a document in MS Word are created by pressing just one button, which is located in the tab " Insert". But it’s not so easy to remove the sheet, although this is also not a very difficult process.

Another option to create a sheet is to click on the button Enter. That is, by pressing this button many times, you can reach the end of the current page and go to a new one. Accordingly, in order to remove the sheet, you need to remove the indents, and you can do this using the buttons " Delete" and " backspace».

It's very simple. Similarly, you can remove a blank page located in the middle of the document.

By the way, to calculate where the indents are, the button " Show all icons". Clicking on it will allow you to see all the indents between words or the presence of paragraphs in any part of the document.

Also, be sure to review the blank page and the previous one, as the first one could be created due to the created “ Page break". You can remove it using all the same buttons " Delete" and " backspace».

Well, another option for deleting a blank page is the key combination " ctrl+Z» - undo the previous action. That is, when using this combination, you cancel the last action you performed, which could be clicking on the “Page Break” button or putting an extra indent with Enter.

If for some reason you do not have access to the keyboard, then in the text editor window there is a button "Cancel input". It is located in the upper left part of the Microsoft Word program window, next to the " office».

Since ancient times, the folk truth has been saying: “what is written with a pen, everything is bye-bye, you can’t cut it down with an ax.” No, cunning and resourceful comrades can, of course, object here. So to speak, to counterbalance the argument. And why, for example, not tear out a sheet with spellings that are no longer needed, but throw it out - in a basket, or burn it altogether. It is possible, and what is not! But you have to work hard, sweat, sweat ... Especially if the pages need to be quietly destroyed in some report, diary, journal or (God forbid!) an art book.

Is it another matter to delete a page in Word. That's where the freedom of action and completeness of sensations from editing a virtual canvas for writing. No transaction costs, no signs of "execution" over the sheet, whether it is empty or with words. In short, a custom grace.

However, you need to know where these very buttons for this very thing are located and how to manage them correctly. Don't know yet? Then check out the instructions below. And your work in Word will become much more comfortable.

The sheet is removed from the project in various ways and functions, depending on the specific situation, the user task.

How to delete an empty sheet?

1. Position the cursor on a blank page to be deleted.

2. Press the Ctrl + Shift + 8 keys at the same time. Or click the ¶ (show all characters) icon in the Word interface panel.

3. After activating this function, special control characters will be displayed on a blank page. They are responsible for text formatting, and in the normal text display mode they remain invisible. Delete them with the "backspace" button ("left arrow" above "Enter") or "Delete" (Del). After cleaning, the blank sheet will automatically disappear.